8x 40mm - Sleeve Anchor 8x 40mm x Q:4
Code:3H63
Barcode:6002919072622

Can be used to hang light to heavy weight objects.

The hex head of the anchor sits on top of the surface of the item being attached and does not offer a flush finish.

This product is inferior to an expansion bolt.

Drill a hole in the brick or concrete wall the same diameter as the anchor diameter.

The hole depth should be 1cm deeper than the length of the sleeve and set screw.

Set the nut flush with the top of the sleeve anchor.

Insert the sleeve anchor through the fixture into the pilot hole.

Turn the nut with a spanner to fasten the anchor until tight.

Do not over tighten.

×
<
>